For a variety of coolers，how can we choose a good cooler

For a variety of coolers, how to choose is more important, so how can we choose a good cooler?

Cooler, also known as heat exchanger, is an energy-saving device that can transfer two kinds of fluids with different temperatures or more than two kinds of fluids. Its working principle is to transfer the higher-calorie fluid to the lower-calorie fluid, so that the temperature of the mixed fluid reaches the specified temperature value, and finally meets the requirements of the process for the material temperature, which will not only save materials, but also improve energy utilization rate. With the rapid development of energy-saving technologies, there are more and more types of coolers, and the industry covers more and more industries, including HVAC, water treatment equipment and other industries.

The forced positive displacement cooler, like any cooler, has a specified fixed range of output heat load, so when selecting, it can only be selected according to the maximum load. And in the process of use, it is also necessary to consider the existence of other external factors, which may cause large fluctuations in the amount of change. According to research, under low-load working conditions, only 30% can be used, which will cause a lot of energy waste. In order to solve the above problems, the forced volume cooler can be controlled according to the user's needs at different stages and temperature changes. Because it uses high-efficiency and energy-saving heat exchange tubes, modular structure settings, and a reasonable supercooling device, it is not easy to cause scaling. Due to the use of vortex-shaped copper tubes, the fluid that easily forms turbulence has a strong scouring effect on the tube wall. In addition, the tube itself has a thermal compensation capability, which can achieve self-cleaning through thermal expansion and contraction, so it is not easy to scale in the tube; safe operation reliable. In addition, the forced volume cooler is quick to install and easy to maintain. There is no need to operate in the computer room, and only need to be connected to the system pipeline when transported to the site.