When to replace your commercial storage bin

Once the water ice maker factory reaches the insulation, corrosion is inevitable. However, water should never seep through the watertight interior lining. That’s what it’s there for, which is why you need to make sure your dispenser is installed correctly from the outset.If you notice any signs of corrosion or rust on the exterior, you probably have a leak, a sign of improper installation. In any case, deal with corrosion as soon as you see it to prevent further damage to the foam insulation.

Corrosion isn’t the only thing that may damage your storage bin from the outside. The more you use your ice dispenser, the more bumps, scrapes, and trauma it’s likely to suffer. This would eventually damage the exterior. Once that happens, its only a matter of time before you lose insulation.Check for cracks or depressed surfaces at least once a day. The former might open up the bin to outside contaminants, resulting in internal corrosion, scum, mold, and ice contamination. 

Most ice dispensers have a polyurethane liner that protects the interior from moisture. If this liner starts wearing off or gets damaged due to an ice scoop, shovel, or rake, it might expose the insulating foam.Foam or no foam, if there’s damage to the interior, you might want to replace your ice bin. If you don’t, the moisture could cause mold, scum, or corrosion, which would melt your ice faster.

If it’s not up to mark, you need to replace it.You can’t see foam insulation because it’s right under the liner, but that doesnt mean its immune to water damage. Fortunately, corrosion underneath the lining isn’t completely invisible.If you notice the interior separating from the foam or bubbling out in places, you’ve probably got moisture underneath.